Ground Line & Specialty Shotcrete Fleet

Line Pump & Shotcrete Services

Trailer-mounted line pumps and high-pressure shotcrete delivery for tight backyard access.

We dispatch Northeast Florida's most stable and maneuverable trailer-mounted concrete ground line pumps. From compact Putzmeister City Pumps designed to stage off-site at the curb and snake flexible ground lines past narrow side gates (under 36 inches clear), to high-pressure shotcrete systems for structural pools and retaining walls, we deliver concrete exactly where it belongs.

300'
Maximum Line Reach
3/8"
Pea Gravel Spec
Zero
Paver Tire Strains
Compact concrete ground line pump trailer parked curbside, hoses snaked toward rear lot
Curbside Dispatch — Jacksonville, FL
Active Line Dispatch
Line Pump — Mandarin backyard pool deck — 22 yds sieved mix placed safely
The Basics

What Is a Concrete Line Pump?

A line pump (also called a trailer pump or ground pump) is a compact, trailer-mounted unit that pushes concrete through flexible 2-inch or rigid 3-inch hose sections laid directly on the ground, rather than through a truck-mounted articulating boom. Crew members manually route the hose from the pump to the placement point, section by section.

That ground-level flexibility is the whole point: a line pump can snake hose through a side gate, around a house, over a fence line, or into a backyard a boom truck could never stage over. It's the standard choice for residential work — driveways, patios, pool decks, footers — and for masonry block fill and tight-access grouting on commercial sites.

Line pumps trade the boom's speed and reach for maneuverability. Where a boom can place 160+ yards an hour from a fixed staging position, a line pump runs a smaller crew and lower yardage rate through hand-routed hose — which is exactly what a tight residential lot calls for.

At a Glance

  • Hose reach: Up to 300+ feet of horizontal routing
  • Output: Up to 70 cubic yards per hour
  • Hose diameter: 2-inch flexible or 3-inch rigid steel
  • Best for: Driveways, pool decks, footers, block fill
  • Footprint: Compact trailer, fits most driveways & curb lanes
Line Specifications

Trailer Pump Fleet Specifications

Ground-Line concrete pumps provide unprecedented staging flexibility. Review line pipe diameters, aggregate limits, and horizontal reaches side-by-side.

2"

2-Inch Flexible Rubber Hoses

Our most agile placement pipeline system. Laying lightweight 2-inch rubber hoses manually along form edges easily bypasses standard fence gates, side setbacks, and pool screen enclosures.

  • Aggregate Spec: 3/8" Max Pea-Gravel
  • Maximum Reach: Up to 250 Feet
  • Slab Protection: 100% Turf-Safe
3"

3-Inch Rigid Steel Pipelines

Engineered for higher volumes and longer horizontal pushes. Heavy-duty 3-inch rigid pipes are clamped together by hand, creating a high-pressure line capable of handling structural house monolithic foundations.

  • Aggregate Spec: 1/2" Coarse aggregate
  • Maximum Reach: Up to 350 Feet
  • Ideal Use: Monolithic custom slabs, footers
SC

Specialty Shotcrete Systems

High-pressure concrete spraying systems. Using low-slump concrete mix designs, shotcrete is sprayed directly onto retaining walls, swimming pool steel frameworks, or rock slopes, curing to high densities.

  • Compressive strength: 4,000 PSI+
  • Flow Rate: Continuous Nozzle Speed
  • Ideal Use: Inground pool shell spraying
Choosing the Right Equipment

Line Pump or Boom Pump?

A line pump is the right call for most residential jobs. Large commercial pours or elevated placements need a boom instead.

Choose a Line Pump If…

  • It's a residential driveway, patio, footer, or pool deck
  • The lot is tight, fenced-in, or an HOA restricts boom truck staging
  • You need masonry block fill or tight-access grouting
  • Yardage is modest and hose can reach the pour on the ground

Choose a Boom Pump If…

  • The pour is 50+ yards or needs to stay continuous/monolithic
  • Concrete needs to reach an elevated floor, roof, or upper-story opening
  • The site has obstacles between the truck and placement point
  • It's a commercial foundation, tilt-wall, or industrial slab job
Line Operations Exhibit

Mandarin Backyard Pool Staging Exhibit

Explore real operational proof of our ground-line placements. Inspect the active curbside staging blueprint, concrete slump quality sheet, and live operator SMS feeds for a recent 22-yard continuous pour in Mandarin.

PUBLIC ROADWAY / STREET CURB TRAILER PUMP RIG #14 STAGED READY-MIX TRUCK VULCAN MIXER #2 SIDEWALK EASEMENT (SAFE) INTERLOCKING STONE PAVERS NO HEAVY MIXER TIRES MANDARIN TOWNHOME NARROW 36" SIDE GATE BACKYARD POOL SLAB PLACING ACTIVE FDEP WASHOUT BAG STAGING LOGISTICS & LEGEND 1. RIG REMAINS OFF-SITE ON ROAD APARTMENT. 2. HOSES LAY FLAT BYPASSING PAVER Driveway. 3. COMPACT 2" HOSES FIT THROUGH 36" SIDE GATES.

Mandarin Backyard Pool Deck Staging

Drawing Ref: PM-LINE-MANDARINPOOL

This rigging blueprint details Ground-Line trailer pump staging on curved residential pool decks in Mandarin. Custom inground concrete pools are typically built behind existing structures where heavy truck machinery access is completely blocked by side boundaries, fences, and utility easements.

By manually laying flat flexible 2-inch rubber pipelines along property margins, we navigate a narrow **36-inch side gate** and place concrete cleanly in the backyard pool deck with zero sod compaction, pavers strain, or landscape destruction.

Paver Driveway Safety: 100% Curbside Staging Protection
Gate Width Access: Navigates Gates Down to 36"
Pumping Aggregate Target: 3/8" Pea-Gravel Sieve Spec

The 3/8-Inch Aggregate Limit

Ground-Line concrete pumps use smaller-diameter pipelines (typically 2-inch flexible rubber hoses or 3-inch rigid pipes) to navigate tight residential properties. Staging these compact lines requires specialized concrete mixes. Standard concrete mixes contain **3/4-inch coarse limestone aggregates** that easily bridge and pack inside a 2-inch hose elbow, creating immediate dry packs and pipeline blowouts.

To pump ground lines successfully, we mandate a specialized **3/8-inch pea gravel sieve-grade pump-mix**. The small rounded aggregate grains flow smoothly through the hose conduit under pressure, preventing pipeline segregation. Always verify that your ready-mix batch plant coordinator schedules a sieved aggregate pump-mix.

Access Gate & Landscaping Safeguards

Residential backyards are typically enclosed by wooden or vinyl privacy fences. Staging standard commercial construction equipment past these barriers requires removing entire fence panels, which is structurally disruptive and expensive.

Our Ground-Line services navigate standard residential access gates down to **36 inches wide** with ease. Lightweight ground lines are routed flat along lawn margins, bypassing mature landscaping and valuable turf. By keeping massive ready-mix mixer truck wheels completely off the lawn, we eliminate structural turf rutting and paver cracking, leaving your property in pristine condition on completion.

■ GROUND LINE SETUP SPECS: Hose Diameter: 2-inch flexible rubber ground lines Design Slump Target: 4.5 to 5.0 Inches (superplasticizer spec) Aggregate Specification: 3/8-inch rounded pea gravel sieved spec Washout System: Contained, lined FDEP portable bags
The Process

How Line Pump Dispatch Works

1

Request Availability

Tell us your yardage, pour date, and site access details. We confirm trailer availability and hose length needed.

2

Plan Hose Routing

We map the route from curb to pour point — through gates, along fence lines, or across turf — to protect your landscaping.

3

Coordinate Ready-Mix

We sync truck timing with your ready-mix plant so the pour stays steady without gaps or cold joints forming.

4

Pour, Wash Out, Done

We place the concrete, break down and clean the hose sections, complete washout, and clear the site.

Budgeting

Line Pump Pricing at a Glance

Line pump jobs run on a standard 4-hour portal-to-portal minimum, generally starting around $700–$900, covering travel, hose setup, pumping time, and washout. Once the minimum is met, billing shifts to a per-cubic-yard rate.

Because line pumps mobilize faster and need less setup than a boom rig, they're typically the more cost-effective choice for residential-scale pours. An environmental washout fee applies if a compliant, lined washout pit or bag isn't available on-site.

See Full Rates & Minimums
Base Minimum
$700–$900
4-hour portal-to-portal
Billed Beyond Minimum
Per Cubic Yard
Standard residential rate
Washout
Fee If No Pit
EPA-compliant containment required
Hose Length
Up to 300ft
Longer runs may add setup time
Common Questions

Line Pump FAQ

How far can a line pump reach into a backyard? +
Our trailer pumps can route up to 300+ feet of 2-inch or 3-inch hose from the trailer to the pour point, hand-carried section by section through gates, along fence lines, or across the yard. We plan the exact route with you ahead of time to avoid damaging landscaping, irrigation lines, or hardscaping.
Can a line pump handle masonry block fill? +
Yes — line pumps are the standard equipment for masonry block fill and tight-access grouting. The controllable, lower-pressure flow through 2-inch hose is well suited to filling CMU block cores without overloading or blowing out the wall.
What aggregate size can a line pump handle? +
Standard 2-inch line pump hose handles aggregate up to about 3/8-inch (pea gravel mixes). Larger aggregate risks bridging and blockages in the smaller hose diameter — if your mix design calls for larger aggregate, let us know so we can plan for 3-inch rigid pipeline sections instead.
Will a line pump damage my driveway, turf, or landscaping? +
The trailer pump itself stays curbside or in the driveway — only the lightweight hose sections cross your yard. We route hose along the safest path, use protective mats over turf or pavers where needed, and hand-carry sections around obstacles rather than dragging them.
How much does a line pump cost compared to a boom pump? +
Line pumps generally start lower — around $700–$900 for the 4-hour minimum — versus a higher minimum for boom pumps, since booms require more mobilization and setup. For a small residential pour, a line pump is almost always the more economical choice, assuming ground routing is feasible.
Do I need to be home during the pour? +
We recommend having someone available to unlock gates and confirm the hose route, but you don't need to be present for the entire pour. Many of our residential clients coordinate access with their contractor and check in once the pour is complete.
Dispatch Coverage

Line Pump Dispatch Across Northeast Florida

Trailer line pumps are our go-to for tight residential lots, HOA-restricted communities, and job sites a boom truck can't stage on. We run ground line dispatch throughout Duval, St. Johns, Clay, and Nassau counties — check the local guide for access notes specific to your area.

Same-Day Dispatch
(904) 927-4109
Call Now